Flying-Hobby
ALUMINUM CANOPY MOUNT SET (SILVER)
Description:, Replace stock plastic canopy mounts with these strong and stylish CNC aluminum canopy mounts set. This canopy mount set is designed to work on Thunder Tiger Mini Titan E325 to replace stock plastic canopy mount. This set also includes a strong aluminum canopy mount support. All 3 pieces are designed with drill holes to allow users to insert small sticks such as small allen keys in to hold and tighten the canopy mount without using pliers., Includes:, -Two CNC aluminum canopy mount,
-One CNC aluminum canopy mount support -Two screwsFlying-Hobby
HOBBYWING PENTIUM -12A
| 5.6V --- 16.8V ( Lithium | 2 – 4s or NiMH/NiCd 5 -12 Cells) |
| 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM | BrushLess Motor) |
| 3 sets of gold plated motor connectors and heat-shrink tubings (Remark | motor connectors and heat-shrink tubings need to be purchased additionally) |
:, Continues 12A, Burst 15A up to 10 Secs., :, :linear mode BEC 1A, Max Speed:, : 24mm*32mm*8mm(width*length*height), :12g, Packaging include:, , Safety Arming Feature:, Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened., Calibration:, Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters., :?, :, brake enabled / brake disabled, default is brake disabled, : Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd)?default is Li-xx., :, power reducing / power cutoff, default is power reducing., :, low / medium / high, default is medium cutoff voltage., 1) For Li-xx battery?number of battery cells are judged automatically?low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 3 Cells Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.85*3=8.55V., 2) For Ni-xx battery, low / medium / high cutoff voltages are 0/45%/60% of the startup voltage. (0% means the low voltage cutoff function is disabled). For example: 10 cells NiMH battery, fully charged voltage is 1.44*10=14.4V, when medium cutoff voltage is set, the cutoff voltage is : 14.4*45%=6.5V, Startup mode:, normal / soft / super-soft, default is normal startup., Timing:, low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used., eatures:, Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.,
1 Specification 1.1 Output 1.2 Input Voltage 1.3 BEC (Battery ...Flying-Hobby
EDGE 603MM PREMIUM CF BLADES - FLYBARLESS VERSION
| Specs | - Length |
| - Width | 55mm |
| - Root | 12mm |
| - Bolt Hole | 4mm |
| - Weight | ~ 135 grams |
Description :, EDGE high performance CF rotor blades are new premium blades that have been specifically designed for today's model helicopters. EDGE rotor blades have been optimized for use with today's light weight, high powered models with increased cyclic pitch. While these blades are ideal for aggressive Flybarless 3D performance, they can also be used for more precision FAI & FC3 flying on traditional flybar machines., Features:, - Airfoil designed specifically for flybarless helicopters., Includes:, - One pair of EDGE blades.,
Flybarless Edge blades may be flown on a traditional flybar ...Flying-Hobby
CNC MAIN DRIVE GEAR/164T
| ●Weight | 48g |
Instruction:, ●Newly designed highly rigid 700 M0.7 main gear, manufactured through high precision CNC machining process, with wear resistant, low noise, and highly efficient energy transfer properties to dramatically increase power output., Specification:, ●CNC M0.7 Main drive gear(164T) x 1,
●Use for T-REX 700 Nitro Pro.Flying-Hobby
BRUSHLESS TAIL MOTOR CH06XL 8000KV - MCPX
| Weight | 6.8g |
| Max Power | 4.2V 1.4A |
| Dimension | 17 x 13.8 (mm) |
| Length of shaft | 6mm |
| Diameter of shaft | 1.5mm |
Flying-Hobby
T-REX 100X SUPER COMBO
| Specification | ●Length |
| ●Height | 82mm |
| ●Main Rotor Diameter | 192mm |
| ●Tail Rotor Diameter | 36mm |
| ●Weight(w/o power system) | 28.8g |
| ●Flying Weight | Approx 33g |
Introduction:, ●Fun and easy flying characteristic has been the reason for T-Rex 100S’s unparallel popularity. To increase its performance even further, Aligh has improved upon the T-Rex 100S and introduces the brand new T-Rex 100X., Features:, ●Brand new rotor head to main shaft attachment design, improving flight stability and minimize vibration., Accessories:, ● T-REX 100X Kits set x 1,
●To improve the flight stability and shorter learning curve, rotor ...Flying-Hobby
FUTABA BLS172SV SBUS2 HV ULTRA TORQ PROGRAMMABLE SERVO
| Torque | 514 oz-in (37 kg-cm) @ 7.4V |
| Speed | 0.11 sec/60° @ 7.4V |
| Dimensions | 1-9/16 x 13/16 x 1-1/2" (41 x 21 x 38mm) |
| Weight | 2.6 oz (74 g) |
FEATURES:, Brushless motor offers incredible holding power and 5X longer life than servos equipped with brushed motors Ultra high torque Handles up to 2S LiPo power Programmable and compatible with S.Bus and S.Bus2 Dual ball bearing supported output shaft Aluminum center case One year limited warranty through Hobby Services beginning at date of purchase, INCLUDES:, HV BLS172SV UHT S.Bus2 Servo with Instructions 0.83" (21mm) Round Horn 1.8" (45mm) Round Horn 1.5" (39mm) Four Point Horn 1.2" (32mm) Six Point Horn Four each, Grommets, Eyelets and Mounting Screws, SPECS:,
Flying-Hobby
DIGITAL ANEMOMETER
| *Measurement items | Air velocity, Air temperature |
| ----Air velocity | 0~30m/s, 0~90km/h, 0~5860ft/min, 0~55knots, 0.87~65mph (± 5%) |
| ----Air temperature | -10~45º C, 14~113º F (± 2º C) |
| *Resolution | 0.2º C, 0.2m/s |
| *Display | LCD |
| ----Air velocity sensor | Plastic impeller, magnetic induction |
| ----Temperature sensor | NTC thermometer |
| *Low battery indication | Yes |
| *Auto power shut off | 14 minutes without any operation |
| *Backlight | 12 seconds active by press any key |
| *Packing | Blister+Card |
| *Power | CR2032 3.0V |
| *Dimension | 104.3x57.8x19.9mm |
| *Net weight | 52g (including battery) |
*Measurement range:, *Sensor:,
Product Description Anemometer GM816 *MAX/MIN/AVG readingFlying-Hobby
FUTABA SBC-1 S.BUS CHANNEL SETTING TOOL
| Weight | 0.28oz (7.8g) |
| Operating Temperature Range | -10° to 45° C |
Specifications:, Dimensions:, 1.54 x 1.02 x 0.39" (39 x 26 x 10mm), Power Requirement:, 4 - 5 cell NiCd, NiMH, NOTE:, Do not connect anything other than a Futaba S.Bus servo or S.Bus decoder to the Channel Setting Tool. If a conventional servo is connected, the servo may operate erroneously.,
This is the Futaba SBC-1 S.Bus Channel Setting Tool. This ...Flying-Hobby
FUTABA BLS257 BRUSHLESS HELI RUDDER MINI SERVO
| Torque | 36 oz-in. (2.6 kg-cm) @ 4.8V Speed |
| Weight | 0.92 oz (26g) |
FEATURES:, Designed for 3D helis 30% faster response than standard digital servos and five times longer lasting than servos with brushed motors Same power consumption as brushed digital servos One year limited warranty through manufacturer beginning at date of purchase, INCLUDES:, Futaba BLS257 Brushless Heli Rudder Mini Digital Servo with universal connector,, REQUIRES:, Installing in heli, connecting linkage and connecting to receiver, SPECS:,
This is the Futaba BLS257 Brushless Rudder Mini Digital Servo. ...Flying-Hobby
CAPACITOR PACK (12S MAX, 50.0V, 1100UF)
Helis:, CC CapPack is highly recommended for all 500 class and larger heli applications where Y harnesses and long wires can bleed voltage and hard collective pulls can strain even the most powerful batteries., Cars/Trucks:, With their high torque requirements – going from 0 to 100% throttle isn't easy on controllers or batteries - RC cars and trucks put enormous loads on brushless power systems. Use CC CapPack to help your system power through the abuse., Aircraft:, Larger electric power systems lead to larger electric powered aircraft, and sometimes the distance between the battery pack and the ESC grows beyond the length of the wires installed on the components. Adding wire also adds inductance, which can increase the ripple voltage in a system. CC CapPack essentially negates the ripple caused by the addition of up to 8 inches of length to the battery wires., Note: All Castle controllers with data logging capabilities can report the ripple voltage they encounter during use. Ripple voltage peaks should always be less than 10% of the total pack voltage; the smaller the ripple voltage the better. If an application exhibits more than 10% ripple voltage under peak loads, the user should consider using higher discharge (C Rating) batteries, shorter wires, higher current connectors, better gearing or a smaller load.,
CC CapPack is useful in all brushless motor applications, where ...Flying-Hobby
BALANCE CHARGER RCC-3SX
| 4.Auto-detected charge status display. (Red light | while charging Green light |
| ● Input Voltage | AC 100V~240V(50/60Hz) |
| ● Output Voltage | 2cell DC 7.4V / 3cell DC 11.1V |
| ● Supported Battery Type | Li-polymer / Li-ion |
| ● Charging Method | CC/CV |
| ● Size | 123x74.3x32mm |
| ● Weight | 260g |
| Accessories | ●AC Power cord x1 |
Instructions:, 1.Suitable for international AC 100V~240V., NOTE:, 1.Do not leave the charger is operating unattended as it may cause a fire., Specification:, ● Charging Current: 2A,
2.Voltage balancing charging suitable for 2S 7.4V and 3S 11.1V ...Flying-Hobby
PHOENIX EDGE 130 HV (32V 130 AMP) BRUSHLESS ESC
| MIN | 2S LiPo MAX |
Helis:, 550 Class, or 600 Class (use external BEC or RX/servo power source; not included), Fixed wing:, 1.20, Input voltage:, Max continuous amperage at full throttle:, , BEC voltage (voltage regulator for powering radio and sevos):, User selectable choice from 5 to 8.4 volt output, BEC output amperage:, , Width:, 2.0" (50.8mm), Length:, 3.3" (83.6mm), Height:, 0.9" (23.2mm), Weight w/wires:, 5.3 oz (150.6g), Weight w/o wires:, 3.0 oz (86.6g), Programmability:, Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link USB adapter included in package) and freely downloadable Castle Link Windows software., Connectors:, , Tools needed for installation:, Soldering iron and solder to attach bullets to motor wires and battery connector to power wires.,
Product description Applications Technical Specs 130 amps* 5 amp peak** ...Flying-Hobby
HIGH QUALITY CARBON FIBER MAIN BLADES (810MM) RED
| Product Detail | • Length |
| • Width | 65mm |
| • Weight | 410-420g |
| • Grip | 14mm |
| • Hole | 5mm |
| • Airfoil | Asymmetric |
| • Tip | 4 dergee cathedral Angled |
| • Make | Carbon Fiber |
| • Common Application | Large Gas Powered RC Helicopters |
Flying-Hobby
ETECH UNDERWATER SCUBA MASK CAMERA VIDEO CAMERA + 4G
| Feature | 5.0MP CMOS sensor |
| Image sensor | 5MP CMOS sensor |
| Display screen | digital and icon LCD display |
| Power | 3.7V rechargeable lithium battery |
| USB interface | USD 2.0 high speed |
| Flash light | built-in LED flash light |
| Resolution | 2592*1944 |
| Photo format | JPG |
| Video size | 640*480/720*480,subject to the actual model |
| Video frame | 30fps/s |
| Video format | AVI |
| Memory | 4gb |
| Photo quantity | 2GB=2350 photos |
| Continuous DV recording time | 4GB=4 hours |
| Battery duration | 3 hours |
| Operating system | Microsoft windows2000,XP,Vista |
| Approved | CE,FCC |
Descriptions:, The Digital Camera Mask can take still pictures of all the underwater action or you can even take videos which is great for catching all the action you might otherwise miss if you are just relying on hitting the shutter at just the right moment and staying the right way up while underwater!This Digital Camera Mask is waterproof up to 15 meters so unless your a deep sea spaner then its going to work great for you.You can even Film using your Camera Mask! How cool is that!, Specification:, Package Lists:, Underwater Digital Camera Mask, Notes:, When facing the objects,the best focus distance is 2M~3M,
Specifications > waterproof up to 15 m > take photos ...